Please Note: You are viewing the unstyled version of Piezo Technologies. Either your browser does not support CSS (Cascading Style Sheets) or it is disabled. As a result, much of this website will not look the way it was intended, although all of its contents will be accessible to you. For more information, visit our Browser Support page.
Information Request

Piezo Tech is ISO 9001:2000 Certified. Certification No. C2006-02533. Etalon logo

Home > Ultrasonic Transducers > Angle Beam

Angle Beam Transducers

Ultrasonic Transducers for Flaw Detection, Weld Inspection & Flow Measuring

Angle Beam ultrasonic transducers for flaw detection, weld inspection and flow measuring.Piezo Technologies' Angle Beam Ultrasonic Transducers are designed to provide excellent signal-to-noise ratio, optimum resolution, and high sensitivity for use in flaw detection, weld inspection and flow measuring. Angle Beam Transducers are detachable from the wedges allowing interchangeability.

Transducers are available with BNC, Microdot or potted cable with BNC. Angle Beam Transducers can be supplied with rectangular elements, as a non-detachable assembly, with high temperature wedges – to 600°F (315°C) intermittent, and with transducers and wedges to 600°F (315°C) continuous, 900°F (482°C) intermittent.

Piezo Technologies' develops and manufactures semi-custom, modular, and pure custom (no off-the-shelf) ultrasonic transducer products. Our vast database of past projects provides a base for developing many new products as semi-custom or modular devices. This reduces both cost and turnaround time, while still providing a high quality, unique product. We also specialize in developing pure custom devices. Our technical experts are available to discuss your application and recommend an ultrasonic transducer product that will satisfy your specific requirements. To expedite your inquiry, please fill out our Information Request Form.

All of our finished products can be provided with the specific cabling and adapters you request. Just include your requirements on the Information Request Form or when ordering the product.

ANGLE BEAM TRANSDUCERS
FREQUENCY
(MHz)		 ACTIVE DIAMETER (INCHES)
.250 .375 .500 .750 1.000
0.50     checkmark checkmark checkmark
1.00     checkmark checkmark checkmark
2.25   checkmark checkmark checkmark checkmark
3.50 checkmark checkmark checkmark checkmark checkmark
5.00 checkmark checkmark checkmark checkmark checkmark
7.50 checkmark checkmark checkmark checkmark  
10.00 checkmark checkmark checkmark    

WEDGES
  ACTIVE DIAMETER (INCHES)
.250 .375 .500 .750 1.000
ACRYLIC checkmark checkmark checkmark checkmark checkmark
HIGH TEMP checkmark checkmark checkmark checkmark checkmark

The data listed in this chart is for some common configurations, but Piezo Technologies is not limited to the figures and ranges shown. Ask us about your unique needs here.


Top of Page