Please Note: You are viewing the unstyled version of Piezo Technologies. Either your browser does not support CSS (Cascading Style Sheets) or it is disabled. As a result, much of this website will not look the way it was intended, although all of its contents will be accessible to you. For more information, visit our Browser Support page.
Information Request

Piezo Tech is ISO 9001:2000 Certified. Certification No. C2006-02533. Keramos logo

Home > Advanced Piezoelectrics > Manufacturing Capabilities & Tolerancing Information

Manufacturing Capabilities & Tolerancing Information

Manufacturing Capabilities & Standard Tolerances

Manufacturing Capabilities

CAPABILITY (DIMENSIONAL) ATTRIBUTE MINIMUM MAXIMUM TOLERANCE
Note:  Other shapes possible and quoted on a project basis.
Discs Outside Diameter 0.090" 4.000" ± .00050"
Rectangles Sides 0.040" 5.750" ± .00050"
Squares Sides 0.040" 2.750" ± .00500"
Holes Inside Diameter 0.006" 1.500" ± .00500"
Shears Diameter of Sides 0.050" 1.000"  
Thickness Thickness 0.050" 4.500" ± .00005"

Tolerancing (Standards)

GEOMETRY TOLERANCE
Note:  These are standard tolerances. Higher tolerances available upon request. *As-fired plates have NO tolerance.
Disc Diameter ± 0.0050"
Ring, ID / OD ± 0.0050"
Plates ±0.0050"*
Thickness ± 0.0010"
Concentricity 0.0030"
Parallelism (lapped) 0.0005"/IN
Parallelism (sawed) 0.0040"/IN
Flatness (lapped) 0.0005"/IN
Flatness (sawed) 0.0040"/IN
Perpendicularity 1.0000°
Position 0.0050"
Angularity ± 2.0000°
Roundness 0.0010"
Finish (lapped) 16-Lapped
Finish (grind) 32-Grind

FREQUENCY TOLERANCE
Less than 10 MHz ± 5.0%
10 MHz to 15 MHz ± 7.5%
Greater than 15 MHz ±10.0%

ELECTRODE THICKNESS TOLERANCE
Screened Electrode: 1 Coat ± 0.0002"
Screened Electrode: 2 Coats ± 0.0004"
Sprayed Electrode ± 0.0003"
Sputtered Electrode ± 100.0000Å

Top of Page